Publications

Refereed Journal Publications

  1. Ramaraj, T.C., Santhanam, S., and Shaw, M.C., Tool Fracture at the end of a Cut, Journal of Engineering for Industry (ASME Trans.), Vol. 110, pp 333-338, 1988.
  2. Chandrasekar, S., and Santhanam, S., A Calculation of the Bulk-Modulus of Polycrystalline Materials, Journal of Materials Science, Vol. 24, pp 4265-4267, 1989.
  3. Santhanam, S. and Shaw, M.C., Determination of Flaw Size Distributions by the Crack-off Process, Journal of the American Ceramic Society, Vol 73-10, pp 2922-2925, 1990.
  4. Santhanam, S. and Chandrasekar, S., Internal Pressure Test for Characterizing Fast Fracture Reliability of Grinding Wheels, Journal of Materials Science, Vol. 27, pp 3719-3725, 1992.
  5. Santhanam, S., Fracture Criterion for the Axisymmetric Disking Process, International Journal of Fracture, Vol.60, pp 65-77, 1993.
  6. Santhanam, S., Stress Intensity Factors for a Crack in Planar Disking, International Journal of Fracture, Vol.60, pp 19-32, 1993.
  7. Santhanam, S., Infinite Periodic Array of Cracks in Axisymmetric Disking, International Journal of Solids and Structures, Vol.30, No.6, pp 739-749, 1993.
  8. Gong, H., Jen, K.P., Majerus, J.N., and Santhanam, S., Analytical / Numerical Solutions for a Single Hole-Edge Crack in a Wide Plate under Pure Bending, Engineering Fracture Mechanics, Vol.46, No.5, pp 743-749, 1993.
  9. Santhanam, S., Majerus, J.N., Jen, K.P., and Karanth, D.S., Analytical / Numerical Solutions for a Single Hole-Edge Crack in a Narrow Plate under Pure Bending, Engineering Fracture Mechanics, Vol.46, No.5, pp 751-761, 1993.
  10. Majerus, J. N., and Santhanam, S., Anisotropy in Fracture Behavior of Thin AL 7075-T651 Plates, Engineering Fracture Mechanics, Vol.56, No.3, pp 437-440, 1997.
  11. Santhanam, S., An Elastic-Viscoplastic Constitutive Model for the Hot- Forming of Aluminum Alloys, Journal of Materials Science, Vol.35, pp 3647-3654, 2000.
  12. Santhanam, S., A [90/0]s  Composite Laminate with Part-Through Matrix Cracks in adjacent Plies, Composite Structures,Vol.53/4, pp 499-509, 2001.
  13. Pegada, V., Chun, Y., and Santhanam, S., An Algorithm for Optimal Blank Design for the Deep-Drawing of Aluminum Cups,’ Journal of Materials Processing Technology, 125-126F, pp 743-750, July 2002.
  14. Santhanam, S., An Improved Model for Disking, Journal of Materials Processing Technology, Vol.124/1-2, pp 192-199, July 2002.
  15. McLaughlin Jr., P. V. D, and Santhanam, S., Simulating Damage Growth in a [90/0]s Composite Laminate Using Quasi-2D Finite Element Methods, Composite Structures, Vol.58/2, pp.227-236, Nov. 2002.
  16. Santhanam, S., A method to Extract Interface Stress Intensity Factors for Bimaterial Problems Using Interlayers,  International Journal of Fracture, Vol. 135, pp 137-159, 2005.
  17. Vahdat, V., Santhanam, S., and Chun, Y. W.,  A Numerical Study on the Use of Drawbeads to Minimize the Earing Defect in Deep Drawing,  Journal of Materials Processing and Technology, Vol. 176, pp 70-76, June 2006.
  18. Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., Toughening Behavior in a Carbon Nanotube Reinforced Silicon Nitride Composite, Materials Science and Engineering: A, Volume 491, Issues 1-2, pp 224-229, September 2008.
  19. Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., The Effect of Nano-Sized Sintering Aids on Toughening Behavior of Silicon Nitride, Journal of Materials Science, Vol. 43, pp 2799-2805, April 2008.
  20. Karkamkar, N., Santhanam, S., and McLaughlin, P.V., The Use of Interlayers in Modeling Interface Crack Propagation in Laminated Composites, Engineering Fracture Mechanics, Vol. 75, pp. 5087-5100,  December 2009.
  21. Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., The influence of Nano-Micron Powder Blends on the Microstructure and Mechanical Properties of Silicon Nitride, Advances in Applied Ceramics, Vol.108, No.3, pp.167-173, 2009.
  22. Deshmukh, S., Jen, K.P., and Santhanam, S., ‘Comparison of Silicon Nitride nanofibers synthesized using silica nanopowders and silica gels,’ Materials Science and Applications, Vol.3, No.8, pp.523-529, 2012.
  23. Karambelas, G, Santhanam, S., Wing, Z.N., ‘Strombus gigas inspired biomimetic ceramic composites via SHELL-Sequential Hierarchical Engineered Layer Lamination,’ Ceramics International, vol. 39, pp. 1315-1325, 2013.
  24. Santhanam, S., and Demirli,R., ‘Reflection of Lamb waves obliquely incident on a plate edge,’ Ultrasonics vol. 53, pp. 271-282, 2013.
  25. Jen, K.P., Warzoha, R., Guo, J., Tang, M., and Santhanam, S., ‘Processing and Characterization of Silicon Nitride Nanofiber Paper’, Journal of Nanomaterials, vol. 2013, Article ID 875361, 7 pages, 2013. doi:10.1155/2013/875361.
  26. Qato, L., Santhanam, S., Jones, G.F., Nathan, R., ‘A Fluid-Structure Interaction Study of a Viscous Mechanism of Energy Absorption in Protective Structural Panels’ Finite Elements in Analysis and Design, vol.83, pp.22-32, 2014.
  27. Golato, A., Santhanam, S., and Demirli, R., ‘Lamb wave scattering by a symmetric pair of surface-breaking cracks in a plate,’ Wave Motion, vol. 51, pp 1349-1363, 2014.
  28. DiPette, S., Ural, A., Santhanam, S., ‘Analysis of Toughening Mechanisms in the Strombus Gigas Shell,’ Journal of the Mechanical Behavior of Biomedical Materials, vol. 48, pp. 200-209, 2015.
  29. Andrew Golato, Sridhar Santhanam, Fauzia Ahmad, Moeness G. Amin, "Multimodal sparse reconstruction in guided wave imaging of defects in plates," J. Electron. Imaging 25(4), 043013 (2016), doi: 10.1117/1.JEI.25.4.043013.
  30. Makarian, K., Santhanam, S., Wing, Z.N., ‘Coefficient of thermal expansion of particulate composites with ceramic inclusions,’ Ceramics International, vol. 42, pp. 17659-17665, 2016.
  31. Andrew Golato, Fauzia Ahmad, Sridhar Santhanam, Moeness G. Amin, “Multipath exploitation for enhanced defect imaging using Lamb waves,” NDT&E International, 2017.
  32. Qianhong Wu, Sridhar Santhanam, Rungun Nathan, Qiuyun Wang, “A biphasic approach for the study of lift generation in soft porous media,” Physics of Fluids 29, 043602, 2017.
  33. Sergio Yanez, David Dinehart, Sridhar Santhanam, “ Composite steel joist analysis using experimental stiffness factor from push-out tests,” Vol. 137, pp 1-7, 2017.

 

Conference Proceedings/Presentations

  1. Santhanam, S. and Shaw, M.C., Flow Characteristics for the Complex Stress-State in Metal-Cutting, Annals of CIRP, Vol. 34-1, pp 109-111, 1985.
  2. Ramaraj, T.C., Santhanam, S., and Shaw, M.C., Brittle Fracture of Tools, presented at the 13th Conference on Production Research, Univ. of Florida, Nov. 1986.
  3. Santhanam, S., and Shaw, M.C., Precision Crack-off of Brittle Materials, presented at the 14th Conference on Production Research, Univ. of Michigan, Nov. 1987.
  4. Shaw, M.C., Ramaraj, T.C., and Santhanam, S., The Role of Fracture in Metal-cutting Chip Formation, presented at the Inst. of Metals Conf., Stratford, England, Nov. 1988.
  5. Santhanam, S., and Chandrasekar, S., Internal Pressure Test for Testing Fast-Fracture Reliability of Grinding Wheels, 90-WA/DE-8, ASME Winter Annual Meeting, Dallas, Nov. 1990.
  6. Santhanam, S., and Mayasandra, S., Statistical Reliability Prediction of Cutting Tools: Continuous Cutting Conditions, Transactions of NAMRI/SME, pp 142-147, 1991.
  7. Prakash, G.,  Santhanam, S., Disking-A Process for Cutting Glasses and Ceramics," Annual Meeting of the American Ceramic Society, Minneapolis, April 1992.
  8. McLaughlin, P.V.D., Deshpande, S.M., Futato, L.D., Santhanam, S., and Beaumont, P.W.R, Three-Dimensional Damage Growth in Composite Laminates using Quasi-Two-Dimensional Finite Element Methods, Proceedings Eighth Technical Conference American Society for Composites, pp 693-702, October 1993.
  9. Futato, L.D., Santhanam, S., McLaughlin, P.V.D., Issues Related to Delaminations in a Quasi-Two-Dimensional Finite Element Study of Damage Propagation in Laminates, First International Conference on Composites Engineering, New Orleans, August 1994.
  10. Santhanam, S., Interface Effects in Disking Fracture, Appeared in PED Vol.68-1, pp 461-468; presented at the International Mechanical Engineering Conference and Exposition (formerly ASME Winter Annual Meeting), Chicago, Nov. 1994.
  11. McLaughlin, P. V. D., Santhanam, S., and Kannampully, S. P., Finite Element Approximation of Mode II and III Off-Axis Delamination Growth in Composites, Proceedings, ICCE/4, Fourth International Conference on Composites Engineering, July 6-12, 1997, pp. 649-650.
  12. Murthy, K.S.S., Dutta, P., Bala, S., Raman, K.S., Santhanam, S., Effect of Shielding-Gas and Heat-Input on the Microstructure and Mechanical Properties in Flux-Cored-Arc-Welding of Low-Carbon-Steels, Sixth International Conference on Trends in Welding Research, June 1998, Atlanta.
  13. Santhanam, S., and Bose, S., ‘Constitutive model for shape memory alloys and its use in design and finite element analysis,’ Proceedings of  SPIE's 9th Annual International Symposium on Smart Structures and Materials, San Diego, March 2002.
  14. Pegada, V., Chun, Y., and Santhanam, S., An Algorithm for Optimal Blank Design for the Deep-Drawing of Aluminum Cups,’  Presented at the 9th International Conference on Metal Forming, Birmingham, England, September 2002.
  15. Santhanam, S., A Method to Extract Interface Stress Intensity Factors, Proceedings of the ASME Applied Mechanics Division, Orlando, FL, p 397-405, 2005.
  16. Vahdat, V., Santhanam, S., and Chun, Y.W.,  A Numerical Study on the Use of Drawbeads to minimize the Earing Defect in Deep Drawing,’ Proceedings of the NAMRC 33, p 383-390, 2005.
  17. Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., Enhancing Toughness of Silicon Nitride with Nano-Sintering Aids, 31st International Cocoa Beach Conference on Advanced Ceramics and Composites, Daytona Beach, FL., January 2007.
  18. Pasupuleti, S., Peddetti, R., Santhanam, S., Jen, K.P., Halloran, J., Hecht, M., and Wing, Z., Toughening Behavior in a Carbon Nanotube Reinforced Silicon Nitride Composite, 2007 MS&T Conference, Detroit, MI, September 2007.
  19. Carney, K.S., Lee, R.S., Goldberg, R.K., and Santhanam, S.,  A Heterogeneous Constitutive Model for Reinforced Carbon-Carbon,’ SAMPE Fall Technical Conference, Cincinnati, OH, Nov. 2007.
  20. Santhanam, S., Jen, K.P., and Wing, Z.N., Enhancing Toughness of Silicon Nitrides with Nanoscale Additions, 2008 IMECE, Boston, MA, Nov. 2008.
  21. Santhanam, S., Chun, Y.W., Alaways,L.,  Assessment of ABET Program Outcomes through Capstone Design, 2009 IMECE, Orlando, FL, Nov. 2009.
  22. Caverly, R., Fulmer, H.F., Santhanam, S., Singh, P., Jones, G.F., O’Brien, J.O., Weinstein, R.D., Char, E., Mercede, F., Yost, J., Project Based Freshman Engineering Experience: Core Course,  2010 ASEE Conference, Louisville, KY, June 2010.
  23. Van Treuren, K., Kirk, D., Tan, T.M., Santhanam, S., Developing the Aerospace Workforce: A Boeing Experience, 2010 ASEE Conference, Lousville, KY, June 2010.
  24. Jen, K.P., Deshmukh, S., Santhanam, S., Comparison of Silicon Nitride nanowires synthesized by silica nanopowders and silica gel, MS&T 2010,  Houston, TX, October 2010.
  25. Pellicone, D., Qato, L., Jones, G.F., Santhanam, S., Dougherty, E.,  Viscous Energy Dissipation for Blast-Protection Structures, 2010 IMECE, Vancouver, Canada, November 2010.
  26. Santhanam, S., Karambelas, G., 2011 ASME IMECE, ASME, Denver, CO, "Processing and Characterization of a Biomimetic Ceramic Composite Material", November 15, 2011.
  27. Jen, K.-P. Santhanam, S. , Deshmukh, S., Materials Science & Technology 2011, ACerS, ASM, AIST, TMS, NACE, Columbus Ohio, "Silicon Nitride Nanowire Papers Synthesized by Silica Nanopowders and Silica Gel", October 16, 2011.
  28. Wu, Q., Nathan, R. , Santhanam, S., Gacka, T., The American Physical Society 64th Annual Meeting of the Division of Fluid Dynamics, American Physical Society, Baltimore, MD, "How to Model the Lift Generation in a Highly Compressible Porous Media?", November 22, 2011.
  29. Santhanam, S., and Demirli, R., ‘Reflection and Transmission of Fundamental Lamb Wave Modes Obliquely Incident on a Crack in a Plate,’ Proceedings IEEE IUS Conference, Dresden, Germany, October 2012.
  30. Santhanam, S., ‘Micromechanical modeling of the mechanical behavior of a Mollusk shell and a shell-like biomimetic ceramic,’ ASME IMECE, Houston, TX, 2012.
  31. Jones, G.F., and Santhanam, S., ‘Impact resistance using fluid filled tubular structures,’ ASME IMECE, Houston, TX, 2012.
  32. Santhanam, S., and Demirli, R., ‘Reflection and Transmission of Fundamental Lamb Wave Modes Obliquely Incident on a Symmetric Crack in a Plate,’ Proceedings IEEE IUS Conference, Dresden, Germany, October 2012.
  33. Santhanam, S., and Demirli, R., ‘Scattering of Fundamental Lamb Wave Modes Obliquely Incident on a Surface Breaking Crack in a Plate,’ Proceedings IEEE IUS Conference, Prague, Czech Republic, October 2013.
  34. Golato, A., Santhanam, S., Ahmad, F., Amin, M., ‘Multimodal Sparse Reconstruction in Lamb Wave Based Structural Health Monitoring,’ Proc. SPIE 9109, Compressive Sensing III, 91090P (23 May 2014); doi: 10.1117/12.2050941.
  35. Q. Wu, Y. D. Zhang, M. G. Amin, A. Golato, F. Ahmad, and S. Santhanam, ‘Structural health monitoring exploiting MIMO ultrasonic sensing and group sparse Bayesian learning,’  Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, CA, Nov. 2014. (invited).
  36. S. DiPette, A. Ural, S. Santhanam, “Analysis of Crack Propagation in the Strombus Gigas Conch Shell,” ASME IMECE Montreal, 2014.
  37. A. Golato, S. Santhanam, F. Ahmad, M. Amin, “Multifrequency and Multimodal Sparse Reconstruction in Lamb Wave Based Structural Health Monitoring,Proc. SPIE 9437, Structural Health Monitoring and Inspection of Advanced Materials, Aerospace, and Civil Infrastructure 2015, 94371U (April 1, 2015); doi:10.1117/12.2084822
  38. A. Golato, S. Santhanam, F. Ahmad, M. Amin, “Multipath Exploitation in a Sparse Reconstruction Approach to Lamb Wave Based Structural Health Monitoring,” 10th International Workshop on Structural Health Monitoring, Stanford University, September 2015.
  39. A. Golato, S. Santhanam, F. Ahmad, M. Amin, “ Multimodal Exploitation and Sparse Reconstruction for Guided-Wave Structural Health Monitoring,” Proc. SPIE 9484, Compressive Sensing IV, 94840L (May 19, 2015); doi:10.1117/12.2177472
  40. A. Golato, S. Santhanam, F. Ahmad, M. Amin, ‘Sparsity Based Defect Imaging in Pipes using Guided-Waves,’ Proceedings of 2016 SPIE Defense and Commercial Sensing Conference, Baltimore, April 2016.
  41. A. Golato, S. Santhanam, F. Ahmad, M. Amin,” Scattering of Lamb waves by a cylindrical mass attached to the surface of a plate,’ Proceedings of The ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Vermont, September 2016.
  42. M. Jahanbin, S. Santhanam, J. B. Ihn, ” Interface waves in hybrid metal-composites structures,’ Proceedings of The ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Vermont, September 2016.
  43. K. Makarian, S. Santhanam, Z. Wing, “Improving Thermal Shock Resistance of Castable Refactories,” ASME IMECE Phoenix, November 2016.
  44. K. Peddeti and S. Santhanam, “The effect of pre-stresses on guided wave propagation in plates,” Proceedings of the Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2017 conference, http://dx.doi.org/10.1117/12.2262556. March 2017.
  45. M. Jahanbin, S. Santhanam, J.B. Ihn, A. Cox, “Application of Interface Waves for near surface Damage detection in Hybrid Structures,” Proceedings of the Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2017 conference, March 2017.